No Products in the Cart
- SERVICE@DINOINTHEBOX.COM
- Free shipping over $40; Less than $40, charge $1-$4.99 shipping fee.
| Dimensions | (5.28 x 2.83 x 1.18)" / (13.4 x 7.2 x 3)cm (L x W x H) |
| Color | Black |
| Material | Metal & Plastic |
| Modle | DT1130 |
| Measurement time intervals | 0.4 seconds |
| Operation voltage | 9V |
| Measure frequency range | low frequency: 50Hz-400KHz; high frequency: 30MHz-2000MHz |
| Operation temperaturer | -15¡ãC - 60¡ãC |
| Power Supply | 1 x 6F22 9V Battery(Not Included) |
| Battery Capacity | 800mAh |
Measuring Steps:
1.Switch on the radiation tester and aim at the testing object.
2.Hold the tester and slowly close to the object until the tester touches the object.The shorter the distance is, the greater the radiation it has.(Notice: For high-voltage object, it is advisable to keep the tester a certain distance away from the object.)
3.Change the angle of the tester during the test to achieve accurate measurement.
4.Keep the object on during measurement. If you switch off the device during the process and there is no device nearby, the figure in the tester will become zero.
Notes:
1.The dosimeter is for testing the electric field radiation. If the test equipment earthing shielded, the test would fail.?
2.Metal will shield the radiation, too.
3.If the meter keeps display "0" while testing, please change a battery and test again.
